Oily Rag 1: CD Part 4 Scripts: Difference between revisions
Jump to navigation
Jump to search
(New page: {{Uc nav oily rag 1 CD}} Return to CD Part 4 == cd_mode.pl == <pre> ############################################### ### Uniform Server - CD ...) |
(No difference)
|
Revision as of 21:45, 8 July 2008
|
Oily Rag 1: Introduction | CD Part 1 | CD Part 2 | CD Part 3 | CD Part 4 | CD Part 4 Scripts | CD Part 5 | CD Part 6 | Downloads |
|
|
|
Oily Rag: Be prepared to get your hands dirty. |
cd_mode.pl
###############################################
### Uniform Server - CD Configuration ###
###############################################
# File Name: cd_mode.pl
# Created By: UniCenter MPG
# Edited Last By: Mike Gleaves (Ric)
# Comment: Run US from CD
# Example plugin USCD2 For 3.5-Apollo
# 12-7-07 V1.0
# 2-7-08 V1.1
################################################
#=1 =============================================================
# Read set-up data and check previous mode used
$cd_data = "./uscd/cd_data.txt"; # set-up and tracking file
open(INFILE,$cd_data) or (print "Could not open $cd_data for reading: $!\n"); # open file
@cd_us_data=<INFILE>; # load file data to array
close(INFILE); # close file
$temp_drive = $cd_us_data[0]; # Drive currently used for temp folder
chomp $temp_drive; # clean
$temp_folder = $cd_us_data[1]; # Folder used for temp data
chomp $temp_folder; # clean
$current_mode = $cd_us_data[2]; # Current mode set
chomp $current_mode; # clean
$previous_drive = $cd_us_data[3]; # previous drive
chomp $previous_drive; # clean
$previous_folder = $cd_us_data[4]; # previous folder
chomp $previous_folder; # clean
# check current mode
if ($current_mode eq "cd"){ # Are we trying to run in the same mode
system( 'cls' ); # yes well not a good idea
print "You are already running in CD mode!\n";
print "This script will now stop\n\n";
system( 'pause' );
exit;
}
# Previous mode was US so continue
#=2 ============================================================
#Get new user temporary folder or use previous/default set path
system( 'cls' ); #clear screen
print "What temporary folder path would you like to use?\n"; #display message
print "Press enter key to accept default\n";
print " or\n";
print " enter a new value\n\n";
print "Default drive letter is ".$temp_drive." New value = "; #display default drive
my $new_drive = <STDIN>; #get new drive letter
print "\nDefault folder is ".$temp_folder." New value = "; #display default folder
my $new_folder = <STDIN>; #get new folder
chomp $new_drive; #clean input
chomp $new_folder;
if($new_drive eq ""){ #no input
$new_drive = $temp_drive; #use default
}
if($new_folder eq ""){ #no input
$new_folder = $temp_folder; #use default
}
print "\n\n";
#=3 ============================================================
# Set cd_data and save to file
$cd_us_data[0] = $new_drive . "\n"; # set new or use old
$cd_us_data[1] = $new_folder . "\n"; # set new or use old
$cd_us_data[2] = "cd\n"; # change mode to cd
$cd_us_data[3] = $temp_drive . "\n"; # save previous drive
$cd_us_data[4] = $temp_folder . "\n"; # save previous path
# Save cd data to file
open(OUTFILE,">$cd_data") or (print "Unable to open $file for writing:");
foreach $save(@cd_us_data){ # loop through the array
print OUTFILE $save; # write each line
}
close(OUTFILE); # finished close file
#=4 ===========================================================
# Update new_Server_Start and new_Stop bat files with new path
@mpg=(); #clear array
push(@mpg,"./uscd/new_Server_Start.bat"); # path to new start bat
push(@mpg,"set uscddrive=".$temp_drive); # search string
push(@mpg,"set uscddrive=".$new_drive); # replace string
push(@mpg,$st1 = "set uscdfolder=".$temp_folder); # search string
push(@mpg,$st2 = "set uscdfolder=".$new_folder); # replace string
update_files(@mpg); # search replace save file
@mpg=(); #clear array
push(@mpg,"./uscd/new_Stop.bat"); # path to new start bat
push(@mpg,"set uscddrive=".$temp_drive); # search string
push(@mpg,"set uscddrive=".$new_drive); # replace string
push(@mpg,"set uscdfolder=".$temp_folder); # search string
push(@mpg,"set uscdfolder=".$new_folder); # replace string
update_files(@mpg); # search replace save file
#=5 ============================================================
#Copy bat files to Uniform Server folder
coppy ("./uscd/new_Stop.bat","../../../Stop.bat");
coppy ("./uscd/new_Server_Start.bat","../../../Server_Start.bat");
#=6 ============================================================
#.............. DELETE THIS SECTION IF NOT REQUIRED ............
# Also delete corresponding section in file us_mpde.pl
# Replace: Admin menu with CD version limited functions
# Replace: Admin home page.
# Copy: Read_me to docs folder.
coppy ("./uscd/new_navigation.php","../../home/admin/www/navigation.php");
coppy ("./uscd/new_start.php","../../home/admin/www/start.php");
coppy ("./uscd/read_me_cd.txt","../../docs/read_me_cd.txt");
#...............................................................
#=7 ===========================================================
#Build path to temporary folder
$tpath = $new_drive . ":/" . $new_folder; #build path
#=8 ============================================================
# Update Uniserver configuration files
# with new path information.
#=== Apache
@mpg=(); # clear array
push(@mpg,"../../usr/local/apache2/conf/httpd.conf"); # filepath
push(@mpg,"PidFile logs/httpd.pid"); # search for
push(@mpg,"PidFile $tpath/apache/logs/httpd.pid"); # replace with
push(@mpg,"ErrorLog logs/error.log"); # search for
push(@mpg,"ErrorLog $tpath/apache/logs/error.log"); # replace with
push(@mpg,"CustomLog logs/access.log combined"); # search for
push(@mpg,"#CustomLog logs/access.log combined"); # replace with
update_files(@mpg); # search replace save file
#=== END Apache
#===MySQL
@mpg=(); # clear array
push(@mpg,"../../usr/local/mysql/bin/my-small.cnf"); # filepath
push(@mpg,"datadir = \"/usr/local/mysql/data/\""); # search for
push(@mpg,"datadir = \"$tpath/mysql/data/\""); # replace with
push(@mpg,"tmpdir = \"/tmp\""); # search for
push(@mpg,"tmpdir = \"$tpath/mysql/tmp\""); # replace with
update_files(@mpg); # search replace save file
#=== END MySQL
#===php
@mpg=(); # clear array
push(@mpg,"../../usr/local/php/php.ini"); # filepath
push(@mpg,"error_log = logs/logs.log"); # search for
push(@mpg,"error_log = $tpath/php/logs/logs.log"); # replace with
push(@mpg,"upload_tmp_dir = /tmp"); # search for
push(@mpg,"upload_tmp_dir = $tpath/php/tmp"); # replace with
# The default is /tmp/ extra slash at the end? the next two sections capture
# either. When restored using us-mode does not add the extra slash
push(@mpg,"session.save_path = \"/tmp/\""); ## delete line for us-mode search for
push(@mpg,"session.save_path = \"$tpath/php/tmp\""); ## delete line for us-modereplace with
push(@mpg,"session.save_path = \"/tmp\""); # search for
push(@mpg,"session.save_path = \"$tpath/php/tmp\""); # replace with
update_files(@mpg); # search replace save file
#===END php
#===phpMyAdmin
@mpg=(); # clear array
push(@mpg,"../../home/admin/www/phpMyAdmin/config.inc.php");# filepath
push(@mpg,"/etc/phpmyadmin"); # search string
push(@mpg,"$tpath/phpmyadmin/etc/phpmyadmin"); # replace string
push(@mpg,"/tmp"); # search string
push(@mpg,"$tpath/phpmyadmin/tmp"); # replace string
update_files(@mpg); # search replace save file
#===END phpMyAdmin
#=9 ================================================================
system( 'pause' ); # wait for user
#=10 ==============================================================
# Function: Search and replace all string matches in a file.
# Call using: update_files(@myarray) @myarray ordered as follows:
# full file path, search str 1,replace str 1, search str 2,replace str 2..
#...................................................................
sub update_files {
my @search_info = @_; # from flattened array @_ create new array
@search_info=reverse(@search_info); # re-order to give file path first
my $file = pop(@search_info); # get first element of array. File to search
open(INFILE,$file) or (print "Could not open $file for reading: $!\n" and return);
my @text=<INFILE>; # we have file handle, load file to array for searching
close(INFILE); # close file
my $found = 0; # Set if string found in array loaded
while (@search_info !=0){ # loop through replacement array until all data used
#==== Difference between cd-mode and us-mode change string name =============
# This allows common use of the reference cd-mode array @mpg.
# Just copy section 8 Update Uniserver configuration from cd-mode to us-mode
# Once copied delete the lines mentioned in the php section.
# and make sure these strings are renamed switched.
#
$str1 = pop(@search_info); # cd_mode $str1 us-mode $str2 string to search for
$str2 = pop(@search_info); # cd mode $str2 us-mode $str1 replace with string
print "Searching $file for data\n"; # provide feedback to user
foreach $line (@text){ # loop through array
if($line=~/$str1/){ # check we have found a match
$line=~s/$str1/$str2/ig; # yes do the match again and replace
$found = 1; # set tracking variable
print " -Found match in file\n"; # print conformation
}
}#end foreach
}#end while
if($found){ # A match was found hence write to file
open(OUTFILE,">$file") or (print "Unable to open $file for writing:" and return);
foreach $save(@text){ # loop through array set each line to variable $save
print OUTFILE $save; # write each line contained in variable $save
}
close(OUTFILE); # finished close file
}
}#end sub
#========================================= End sub update_files ====
#=11 ===============================================================
# Function: Copy any file to a new location. Call using:
# copy (source, destination)
# Binary transfer mode (bit level)hence image (any) files are allowed.
#...................................................................
sub coppy {
my $source = $_[0]; # full source path including file name
my $destination = $_[1]; # full destination including file name
open (FILE,"$source"); # Open file for input to read source file
binmode FILE; # Binary mode. Bit level for text and image
@lines=<FILE>; # Save bits to array
close (FILE); # Close file handle
open (FILE,">$destination"); # Open or create destination
binmode FILE; # Transfer mode will be binary (bit level)
print FILE @lines; # Copy everything to this file
close (FILE); # Close file
}
#================================================= End sub copy ====
exit;
us_mode.pl
##################################################
### Uniform Server - US Standard Configuration ###
##################################################
# File Name: us_mode.pl
# Created By: UniCenter MPG
# Edited Last By: Mike Gleaves (Ric)
# Comment: Run US from CD
# Example plugin USCD2 For 3.5-Apollo
# 12-7-07 V1.0
# 2-7-08 V1.1
###################################################
#=1 ============================================================
# Read set-up data and check previous mode used
$cd_data = "./uscd/cd_data.txt"; # set-up and tracking file
open(INFILE,$cd_data) or (print "Could not open $cd_data for reading: $!\n"); # open file
@cd_us_data=<INFILE>; # load file data to array
close(INFILE); # close file
$temp_drive = $cd_us_data[0]; # Drive currently used for temp folder
chomp $temp_drive; # clean
$temp_folder = $cd_us_data[1]; # Folder used for temp data
chomp $temp_folder; # clean
$current_mode = $cd_us_data[2]; # Current mode set
chomp $current_mode; # clean
# check current mode
if ($current_mode eq "us"){ # Are we trying to run in the same mode
system( 'cls' ); # yes well not a good idea
print "You are already running in US mode!\n";
print "This script will now stop\n\n";
system( 'pause' );
exit;
}
# Previous mode was CD so continue
#=3 ============================================================
# Set cd_data and save to file
$cd_us_data[2] = "us\n"; # change mode to us
# Save cd data to file
open(OUTFILE,">$cd_data") or (print "Unable to open $file for writing:");
foreach $save(@cd_us_data){ # loop through the array
print OUTFILE $save; # write each line
}
close(OUTFILE);
#=5 ============================================================
#Copy bat files to Uniform Server folder
coppy ("./uscd/old_Stop.bat","../../../Stop.bat");
coppy ("./uscd/old_Server_Start.bat","../../../Server_Start.bat");
#=6 ============================================================
#.............. DELETE THIS SECTION IF NOT REQUIRED ............
#Also delete corresponding section in file cd_mode.pl
#Restore: Original Admin Menu.
#Restore: Original Admin Home Page
#Delete: Read_me doc.
coppy ("./uscd/old_navigation.php","../../home/admin/www/navigation.php");
coppy ("./uscd/old_start.php","../../home/admin/www/start.php");
unlink "../../docs/read_me_cd.txt"; # delete read_me_cd text file
#...............................................................
#=7 ============================================================
#Build path to temporary folder
$tpath = $temp_drive . ":/" . $temp_folder; #build path
#=8 ============================================================
#Update Uniserver configuration files
# with new path information.
#=== Apache
@mpg=(); # clear array
push(@mpg,"../../usr/local/apache2/conf/httpd.conf"); # filepath
push(@mpg,"PidFile logs/httpd.pid"); # search for
push(@mpg,"PidFile $tpath/apache/logs/httpd.pid"); # replace with
push(@mpg,"ErrorLog logs/error.log"); # search for
push(@mpg,"ErrorLog $tpath/apache/logs/error.log"); # replace with
push(@mpg,"CustomLog logs/access.log combined"); # search for
push(@mpg,"#CustomLog logs/access.log combined"); # replace with
update_files(@mpg); # search replace save file
#=== END Apache
#===MySQL
@mpg=(); # clear array
push(@mpg,"../../usr/local/mysql/bin/my-small.cnf"); # filepath
push(@mpg,"datadir = \"/usr/local/mysql/data/\""); # search for
push(@mpg,"datadir = \"$tpath/mysql/data/\""); # replace with
push(@mpg,"tmpdir = \"/tmp\""); # search for
push(@mpg,"tmpdir = \"$tpath/mysql/tmp\""); # replace with
update_files(@mpg); # search replace save file
#=== END MySQL
#===php
@mpg=(); # clear array
push(@mpg,"../../usr/local/php/php.ini"); # filepath
push(@mpg,"error_log = logs/logs.log"); # search for
push(@mpg,"error_log = $tpath/php/logs/logs.log"); # replace with
push(@mpg,"upload_tmp_dir = /tmp"); # search for
push(@mpg,"upload_tmp_dir = $tpath/php/tmp"); # replace with
# The default is /tmp/ extra slash at the end? CD-Mode remove this
# hence only */temp is search for and replaced with this file
push(@mpg,"session.save_path = \"/tmp\""); # search for
push(@mpg,"session.save_path = \"$tpath/php/tmp\""); # replace with
update_files(@mpg); # search replace save file
#===END php
#===phpMyAdmin
@mpg=(); # clear array
push(@mpg,"../../home/admin/www/phpMyAdmin/config.inc.php");# filepath
push(@mpg,"/etc/phpmyadmin"); # search string
push(@mpg,"$tpath/phpmyadmin/etc/phpmyadmin"); # replace string
push(@mpg,"/tmp"); # search string
push(@mpg,"$tpath/phpmyadmin/tmp"); # replace string
update_files(@mpg); # search replace save file
#===END phpMyAdmin
#=9 ===============================================================
system( 'pause' ); # wait for user
#=10 ==============================================================
# Function: Search and replace all string matches in a file.
# Call using: update_files(@myarray) @myarray ordered as follows:
# full file path, search str 1,replace str 1, search str 2,replace str 2..
#...................................................................
sub update_files {
my @search_info = @_; # from flattened array @_ create new array
@search_info=reverse(@search_info); # re-order to give file path first
my $file = pop(@search_info); # get first element of array. File to search
open(INFILE,$file) or (print "Could not open $file for reading: $!\n" and return);
my @text=<INFILE>; # we have file handle, load file to array for searching
close(INFILE); # close file
my $found = 0; # Set if string found in array loaded
while (@search_info !=0){ # loop through replacement array until all data used
#==== Difference between cd-mode and us-mode change string name =============
# This allows common use of the reference cd-mode array @mpg.
# Just copy section 8 Update Uniserver configuration from cd-mode to us-mode
# Once copied delete the lines mentioned in the php section.
# and make sure these strings are renamed switched.
#
$str2 = pop(@search_info); # cd_mode $str1 us-mode $str2 string to search for
$str1 = pop(@search_info); # cd mode $str2 us-mode $str1 replace with string
print "Searching $file for data\n"; # provide feedback to user
foreach $line (@text){ # loop through array
if($line=~/$str1/){ # check we have found a match
$line=~s/$str1/$str2/ig; # yes do the match again and replace
$found = 1; # set tracking variable
print " -Found match in file\n"; # print conformation
}
}#end foreach
}#end while
if($found){ # A match was found hence write to file
open(OUTFILE,">$file") or (print "Unable to open $file for writing:" and return);
foreach $save(@text){ # loop through array set each line to variable $save
print OUTFILE $save; # write each line contained in variable $save
}
close(OUTFILE); # finished close file
}
}#end sub
#========================================= End sub update_files ====
#=11 ===============================================================
# Function: Copy any file to a new location. Call using:
# copy (source, destination)
# Binary transfer mode (bit level)hence image (any) files are allowed.
#...................................................................
sub coppy {
my $source = $_[0]; # full source path including file name
my $destination = $_[1]; # full destination including file name
open (FILE,"$source"); # Open file for input to read source file
binmode FILE; # Binary mode. Bit level for text and image
@lines=<FILE>; # Save bits to array
close (FILE); # Close file handle
open (FILE,">$destination"); # Open or create destination
binmode FILE; # Transfer mode will be binary (bit level)
print FILE @lines; # Copy everything to this file
close (FILE); # Close file
}
#================================================= End sub copy ====
exit;
 |
Ric |